SUPPORTING TABLE AMONGST THE COLUMNS mm 2650-3250-3850×770
SQUARING LENGTH mm 2600-3200-3800
BLADE DIAMETER mm 300/350
BLADE HOLE mm 30
BLADE PROJECTION D.350 (300) to 90° mm 100 (75)
BLADE PROJECTION D.350 (300) to 45° mm 67(45)
SPEED BLADE ROTATION g/min 4000
SPEED BLADE CARRIAGE FEED m/min 4-40
POWER BLADE MOTOR Hp (Kw) 7,5 (5,5)
DIAMETER SUCTION INLET INFERIOR AND SUPERIOR mm 120/100
-Pressor full length with straps anti intrusion front and rear to the blade
-Fixed front table 1000×510 mm with phenolic coating complete with squaring guide till 2500 mm with sliding stop.
-Fixed rear table 1000×400 mm with phenolic coating with guide with double rolling electronic stop with width till
1300mm.Distance between the rear stops 400mm.
-Sliding table 800×200 mm with phenolic coating positioned both front and rear
-Photocell to read the length of the panel for automatic adjustment of the blade carriage stroke.
– s depth with mechanical readout.
-Control Panel on a mobile cart which includes:
Programmer with manual , semi-automatic and automatic mode
250 Programs preset for management of the rear guide and of the tilt blade
Digital readout for the visualization of the measurement of the rear guide
Digital readout for the visualization of the measurement of the tilting blade
Digital readout for the visualization of the blade height (Optional)
Numerical membrane keyboard fro programming
Direct starting button blade motor
Three positions selector for cut with scoring , cut without scoring and only scoring
Axis positioning button
Start work cycle button
Potentiometer for speed adjustment of blade carriage speed regulation
-Structure of the machine body, including:
Reinforced fixed front table and squaring fence with new locking system and micrometric adjustement
Fixed front table with 2 reference supports with locking through 2 stud bolts
Dust evacuation slot between fixed front table and squaring fence
Back extension of the squaring fence, increased to 190 mm
Hinged opening door on top of the machine for inspection and cleaning
Cutting length 3800 mm.
Pusher’s stroke Opt. 3800 – 4300 mm.
Main saw motor 10 Hp (Opt. 12-15 HP).
Scoring saw motor 2 Hp.
Blade projection 100 mm.
PC based numerical control with 21” LCD monitor.
Windows 7 operating system and cutting optimizer software.
The software (Ilenia) can optimize up to 5 different panels
and 100 different parts. Easy programming of even complex
projects cut. Real time graphic of various operation phases.
Cutting levels : precut – X-Y-Z-W. Errors detected and easy
control of PLC’s inputs and outputs. Remote assistance through
internet (the customer must provide internet connection to
the machine’s PC). UPS inside the electrical cabinet for the PC’s
protection. Ventilation in the electrical cabinet
System for grooving cuts in automatic
sequence (manual depth adjustment).
Cut out (window cutting), by program.
Quick blade system Easy-Fix
New sliding system. The Saw carriage runs on hardened
round linear shafts with rack and pinion system for precise
and hi-speed movement
New saw carriage. The vertical rise of the blades is carried out
on prismatic shafts
Automatic blade projection according to the material’s height.
Automatic pusher with 7 Grippers
Pusher’s speed 0.5–25/30 m/min
Max Cutting Length: 4000mm • Saw carriage feeding speed: 1-125m/min • Max.feeding speed: 85m/min • Dia. of main saw: 450mm • Dia. of scoring saw: 200mm/300mm • Main saw motor power: 18.5kw • Scoring saw motor power: 2.2kw • Pusher servo motor power: 2kw(Servo) • Saw carrige driven motor power: 2kw (Servo) • Min. cutting size: 35mm
• Pressure beam automatic positioning system, moving up according to different board size, increasing cutting efficiency by 25%
• Dual pneumatic system for pressure beam, with holding function for pressure beam, avoid pressure beam from dropping when electricity or air is switched off suddenly
• Saw carrier driven by servo motor, rack and pinion, stable movement. Maximum cutting speed is 85m/min
• Pull back position is automatically controlled based on next cutting length, this can reduce unused moving time and greatly improve efficiency
• Air floating platform under pressure beam, avoiding board scratching and assuring smoother board movement
Heavy duty construction, fast speeds, Hi quality components.
6 axis cnc controller (TPA) – Unique performance.
PC based numerical control with 21” flat screen, Windows 10 operating system and professional cutting optimizer software.
System for cutting windows in panels.
System for grooving cuts in automatic sequence and automatic blade projection according to the material’s height.
Αutomatic blade projection according to the material’s height.
Saw blade adjustment by mechanical indicators.
CE rules. Rear safety fence and hands protection curtain.
Cutting length 3200 – 3800 – 4300 mm
Pusher’s stroke 3200- 3800 – 4300 mm
Main saw’s motor power 10-15 HP
Scoring saw’s motor power 2 HP
Cutting height 95mm
Blade projection max 105 mm
STD Inverter for cutting speed 5 – 80 m/min
OPT Brushless motor (SERVO) 0 – 120 m/min
Pusher 8 Grippers
STD Pusher’s speed with inverter 25 m/min
OPT Brushless motor (SERVO) 50 m/min
Main saw 350 mm
Scoring saw 160 mm
STD Front tables 3
OPT Front tables 4
Automatic lubrication for the bearings
Saw carriage movement by rack and pinion.
OPTIONAL UPON REQUEST
Air flotation tables 2000×600 mm
Post forming system
Bar code software and USB label printer
Brushless motor (SERVO) for cutting speed max return speed 0-120 m/min
Brushles s motor (SERVO). Return speed 50 m/min
|Cutting length||2900 – 3200 – 3800 mm|
|Pusher’s stroke||2900 – 3200 – 3800 mm|
|Main saw’s motor power||7.5 HP|
|Scoring saw’s motor power||1 HP|
|Blade projection||70 mm|
|STD Inverter for cutting speed||5-70 m/min|
|STD pusher’s speed with inverter||25 m/min|
|Main saw||300 mm|
|Scoring saw||160 mm|
|STD Front tables||3|
|Automatic side aligner|
|Automatic lubrication for the saw carriage bearings|